五象限法声源自动跟踪器

介绍由两同心圆组成的等投影面积五象限声－电测量装置的工作原理。当声波与声－电转换器的主要测象限垂直时，其声波在主要测象限内产生的声－电电压最强。根据声－电电压的变化大小来确定声源的方向，实现自动跟踪。     

Towards a Fundamental Understanding of the Mechanics of Crystal Agglomeration: A Microscopic and Molecular Approach

A novel experimental apparatus has been developed which enables the measurement of adhesion forces between two crystals suspended in a supersaturated solution and allowed to agglomerate over a fixed time period. The geometry of the crystal surfaces at the contact points and the dynamic development of the bond are captured on video and characterised using an image analysis technique. The experimental apparatus has been designed to allow control of supersaturation, orientation of crystal faces, distance between crystals, relative movement of crystals and contact time. The experimental results show that the agglomerate bond strength, expressed as the agglomerate adhesion force per unit contact area, increases with increasing supersaturation and is higher for faster growing faces than for slower growing faces. In addition, a qualitative comparison has been made between the measured force and a theoretical estimation of the interaction force between crystal faces, determined through molecular modelling. It is shown that the speed of approach of two opposing crystal faces is a key parameter in the nature of the subsequent bond, as is their atomic structure.     

简易超声波换能器频率测试仪的研究

对超声波换能器频率测试系统进行了探讨，并在此基础上提出了改装设想，分析了所研究的简易超声波换能器频率测试仪的电路原理及实验结果。     

一种全场三维共焦检测的新方法

提出了一种利用微光学阵更合成器件实现全场三维面形并行检测、记录的共焦方法。此方法的关键是，在共焦系统中引入一一微光学耻列合成器件来产生一点光源阵列，实现了对同一一剖面同时并行检测，并首次采用了ＣＣＤ面阵像元取代上孔光阑直接截取三维信息光强。本文讨论了该方法的三信息检测原理，响应关系，给出了初步的实验结果和三维重构图。     

爆电换能脉冲大电流输出研究

 基于爆电换能原理，使用掺铌的PZT 95/5陶瓷组装换能器件，在垂直工作模式下，对爆电电源LRC电路响应进行了理论分析，并开展了脉冲大电流输出实验研究。实验采用多组PZT 95/5铁电陶瓷并联，利用平面波发生器作为冲击加载手段，获得了峰值5 kA以上的脉冲大电流，初始电流上升速率可达10~20 GA/s。实验结果与理论设计符合较好。     

微小尺度下自然对流换热特性实验研究

采用直接电加热法对平均为101 μm、403μm及801μm的铜丝进行加热,使用高精度电阻仪测量电加热前及电加热后的铜丝的电阻值,根据温度与金属电阻之间的关系能够相当精确的测量整个铜丝电加热后的平均温度值。电加热时的电压及电流也同时被测量。实验结果表明,在自然对流条件下,实验得到的努谢尔特数与经典的准则关联式得到的努谢尔特数随着外径的减小,其偏差越来越大,最大偏差超过50％。     

A theoretical analysis of a piezoelectric ultrasound device with an active matching layer

This paper investigates the use of magnetically active materials in the matching layer of a piezoelectric transducer. This then allows the performance of the device to be dynamically altered by applying an external field. The effect that this new matching layer has on the performance of a typical device is theoretically investigated here. It transpires that the additional flexibility of an active matching layer can be used to maintain the efficiency of the device as the external load is varied.     

Study on the radial composite piezoelectric ceramic transducer in radial vibration

A new type of radial composite piezoelectric transducer in radial vibration is developed and analyzed. The radial composite transducer consists of a piezoelectric ceramic thin ring polarized in the thickness direction and a metal thin circular ring. They are connected together and excited to vibrate in the radial direction. The radial vibrations of a piezoelectric ceramic thin ring and a metal thin circular ring are analyzed, respectively. Their radial electro-mechanical equivalent circuits are obtained. Based on the electro-mechanical equivalent circuits and using the boundary conditions between the piezoelectric ceramic thin ring and the metal thin circular ring in the radial direction, the electro-mechanical equivalent circuit of the radial composite piezoelectric transducer is derived out and the resonance frequency equation is obtained. The relationship between the resonance frequency and the geometrical dimensions of the transducer is analyzed. Some radial composite piezoelectric transducers are designed and manufactured. The resonance frequencies and the anti-resonance frequencies, the electro-mechanical equivalent circuit parameters are measured. The effective electro-mechanical coupling coefficient and the mechanical quality factor are calculated. It is illustrated that the measured radial resonance frequencies are in good agreement with the theoretical results from the resonance frequency equation.     

非线性工作状态压电换能器匹配技术

针对压电换能器在大功率下存在复杂非线性而导致匹配参数难以优化的问题,以大功率超声金属焊接为例,通过采集测试焊接过程换能器两端电压的幅值与频率,建立换能器反谐振电阻与驱动电压有效值、频率之间的数学模型;提出基于反谐振电阻模型的最优功率匹配方法,推导了匹配电感电容的计算公式。最后实验验证了数学模型的准确性,且当换能器输入功率在最优功率附近时,匹配网络电能传输效率最高。     

氧化锆陶瓷的摩擦磨损行为与机理

氧化锆陶瓷的工程应用前景广阔，在许多场合都必须与水或水溶液接触，但有关这种陶恣在水中的摩擦磨损行为和机理的研究报道不多见，而且已有的工作也不够深入。因此，对氧化锆陶瓷分别在水润滑和干摩擦下的摩擦学特性及其磨损机理进行了考察。